Micro/Macrocentral
Systems
CITS1002
Micro/Macrocel Operation
Class Type
Basic Operation
System
Microcentral/Graphic Central
Duration
2.5 days
Class
Audience Operators
of down-line satellite Excel Plus
processors and/or maintenance personnel for the
Micro/Macrocel Controllers on Microcentral or Graphic Central HVAC Systems
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$1172 per person at site, $1015 per person St Paul
Brief
The class starts with a thorough discussion of the system block diagram
of a Microcentral
or
Graphic Central system. All
components of the system are discussed to a functional
level. The class covers thoroughly the basic operation of the
Micro/Macrocel
Controllers. A
sample proper set of documentation is provided for use at the customer
site.
Test/checkout and diagnostics are covered in detail with actual experiments on
customers’ own equipment or lab equipment as the case may be.
An elaborate trouble
shooting chart
is presented in class. The trouble
shooting section of the class also
points out the technical
limits of the repairs processes for the Micro/Macrocel Controllers.
Written exercises are used to reinforce the learning process.
Objectives
Upon completion of
the course the student will be able to:
·
Identify functionally critical components of
a Micro/Macrocel Controller.
·
Understand the purpose and function of the C-NAP bus.
·
Understand the purpose and function of Micro/Macrocel Firmware.
·
Perform all operator functions using the CCT2194 MPOT.
·
Understand functionally the purpose of the Micro/Macrocel
Controller Point and
Program data files.
·
Identify and work with the Controller inputs and outputs
Topics
·
Micro Central/Graphic Central System Block Diagram
·
CCT2194 MPOT keyboard and usage
·
Micro/Macrocel Controller Functional Hardware/Firmware
·
Micro/Macrocel Controller Diagnostics / Trouble Shooting
Top
Bulletin
CITS5002
Micro/Macrocel System Engineering
Class Type
Engineering
System
Microcentral/Graphic Central
Duration
4.5 days
Class
Audience Mechanical
HVAC systems maintenance persons that have responsibility to maintain or
reconfigure Micro/Macrocel systems integrated with their Excel Plus systems and
using a
Microcentral/Graphic Central front end.
Offered
At
Customer site or St Paul
#
of Students
Minimum 4, Maximum 8
Cost
$2110 per person at site, $1827 St Paul
Brief
The course provides an overview of the entire Excel Plus
system and its extensions and
enhancements. The basic portions of
the course is a complete discussion of the usage of
Microcel Portable Programmer’s Terminal (MPPT) including MCEL Systems
Configuration and System Programming.
The course then goes into a discussion of the
engineering cycle for the MCEL controllers. The course identifies the first step as the
definition of the programming environment for each controller.
This step involves a decision as to whether a Honeywell generated
database or a custom database or a modified Honeywell database will be used
for the relevant controller. This
step also decides as to what Honeywell provided configuration and precoded
files will be used. In the next
step one learns how the point file for the controller is created.
This is followed naturally by the creation of a program file for the
controller using the provided editor program. The intimate connection between
the point file and the program file is pointed out.
The next step shows how to compile the program into an error-free
executable code. This leads into
the creation of an object file for the point and program file set and is ready
for download into the MCEL EEPROM. A
very important part of the course is to deal with the somewhat mythical
function of the MPOT database. The
course shows how point descriptor files are prepared and loaded into the MPOT
and then later used using the Program Select function of the MPOT under the
Main Menu function of Configure MCEL.
The
course also shows the on-line test and checkout of the created databases. The
course even dwells on the aesthetics of the engineering sequence provided by
the Honeywell Engineers.
Objectives
Upon completion of the course the student will be able to:
·
Interface a Microcel Portable Programmer’s Terminal to an MCEL.
·
Perform all Point File Programming functions for any MCEL.
·
Perform all Programming functions for the Point File of any MCEL.
·
Perform all configuration functions of the MPPT.
Topics
·
Installing and running the MPPT program
·
MPPT System Menu Penetration
·
MCEL Point Database Programming
·
MCEL Program Database
·
Microcel Configuration Functions
·
Microcel Operator Functions through the MPPT
·
Program merging for Macrocels
Top
Bulletin
Microcentral
Systems
CITS2001
Excel Plus Microcentral System
Operation
Class Type
Basic Operation
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel responsible for operating the Excel Plus System
with a PC and a Bus
Interface
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course first identifies an Excel Plus Microcentral System using an
elaborate block
diagrams. All operating procedures are then introduced one set at a time with
written lab
exercises. A significant portion of
the class is devoted to generating and understanding
the
standard reports. The adequacy of
these reports for almost all- analytical purposes at
site is
emphasized. The operating procedures for the W1044 XPOT are also covered
to
the
extent of point data access and scheduling. All data entry functions are also learned
and an
overview of the Excel Plus R7044 panel programming is presented.
Objectives
Upon completion of the course the student will be able to:
·
Identify Excel Plus Microcentral System Hardware including the
Peer Bus
·
Identify software/firmware in all components of the Excel Plus
Microcentral System
·
Use the W1044 XPOT to perform Point Data Access and Scheduling
functions.
·
Perform all operator functions using the provided data entry
templates and the short-cuts
·
Perform/create Microcentral Data View screens/shortcuts using
the Keyname Processor
·
Perform all Microcentral Data Entry functions using the provided
templates
·
Perform the critical Microcentral Database Save/Restore
functions using the PC Application Packages Program.
·
Use all features of the PC Applications Packages Program except
the Optional Programs.
Topics
·
Excel Plus Microcentral System Block Diagram
·
Overview of system extensions and enhancements
·
Excel Plus System Software/Firmware
·
Operating Procedures
·
Programming/Data Entry Procedures
·
Overview of Excel Plus Programming
·
Keyname Processor
·
PC Applications Packages
·
System Reports
·
Custom Reports
Top
Bulletin
CITS2002
Excel Plus Microcentral Fire and Security Operation
Class Type
Basic Operation
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel responsible for operating the FS90/FS90 Plus
Microcentral
System with a PC and a Bus Interface
Offered At
Customer site Only
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course first
identifies an FS90/FS90 Plus Microcentral System using an elaborate
block
diagrams. All operating
procedures are then introduced one set at a time with
written lab
exercises. A significant portion of
the class is devoted to generating and
understanding the standard reports. The adequacy of
these reports for almost all
analytical purposes at a site is emphasized. The operating
procedures for the
FS90/FS90 Plus are also covered to the extent of point data access and alarm response.
All data entry functions are also learned
and field programming of the FS90/FS90 Plus is
covered.
Objectives
Upon completion of the course the student will be able to:
·
Identify FS90/FS90 Plus Microcentral System Hardware including
the Peer Bus
·
Identify software/firmware in all components of the FS90/FS90
Plus Microcentral System
·
Perform all field programming functions for the FS90/FS90 Plus
downline processors
·
Perform all operator functions using the provided data entry
templates and the short-cuts
·
Perform/create Microcentral Data View screens/shortcuts using
the Keyname Processor
·
Perform all Microcentral Data Entry functions using the provided
templates
·
Use all features of the PC Applications Packages Program except
the Optional programs.
Topics
·
FS90/FS90 Plus Microcentral System Block Diagram
·
Overview of System Extensions and Enhancements
·
FS90/FS90 Plus System Software/Firmware
·
Operating Procedures
·
Programming/Data Entry Procedures
·
FS90/FS90 Plus Field Programming
·
Keyname Processor
·
PC Applications Packages
·
System Reports
·
Custom Reports
CITS2003
Excel Plus Microcentral Database Modification
Class Type
Data Entry
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel responsible for operating the Excel Plus System
with a PC and a Bus
Interface
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course first
identifies an Excel Plus Microcentral System using an elaborate block
diagrams. The course then makes an immediate detour into the discussion of the
nature of
the Excel Plus downline processor databases.
The controller database is analytically
divided into what is called the Point File and the Program File.
The course is shown to be
concerned with the nature and significance of the Point File.
The course then shows how to display/modify a record in any piece of the Point
file. All
methods of database record access are discussed and exemplified.
Database access
procedures are introduced one set at a time with written lab exercises.
Also all methods
of
database save/restore are shown and tested on-line.
Database
display/modify-operating procedures for the W1044 XPOT are also covered.
Objectives
Upon completion of the course the
student will be able to:
·
Describe the nature and significance of a controller database
·
Perform all Database Modification functions using Record Format
XPOT
·
Perform all Database Modification functions using Record Format
PPT
·
Perform all Database Modification functions using Record Format
Microcentral
·
Perform the critical Microcentral Database Save/Restore
functions using the PC Application Packages Program.
·
Use all features of the PC Applications Packages Program except
the Optional programs.
Topics
·
Excel Plus Microcentral System Block Diagram
·
Overview of Excel Plus System Software/Firmware
·
Nature and significance of R7044 Databases
·
Controller Database Access/Display/Modify Procedures Using
Record Format PPT
·
Controller Database Access/Display/Modify Procedures Using
Record Format Microcentral
·
Controller Database Access/Display/Modify Procedures Using
Record Format XPOT
·
Overview of Excel Plus Programming
CITS2004
Excel Plus Microcentral Energy Management Programming
Class Type
Programming
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel responsible for optimization of
an Excel Plus Microcentral
Energy Management System
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course starts
with a brief introduction to an Excel Plus Microcentral System using a
simplified block diagram. The
course then introduces the theory of operation of each of
the standard energy management programs. This
is followed by an actual example and
lab
exercise to test the working of the program.
It is emphasized that the versatility of the
Honeywell programs is such as to allow application in almost all practical
situations.
Indeed,
it is shown how the programs can modified to be as energy-oriented or as
comfort-oriented
as desired. The built in standard
reports and the custom report
capability are used to track
the progress of each EMS program.
Objectives
Upon completion of the course the student will be able to:
·
Define each of the standard Honeywell Energy Management Programs
on the Excel Plus Microcentral System
·
Identify the required sensor inputs and actuator outputs of all
energy management Programs
·
Understand the theory of operation and control action of each
energy management program .
·
Write/Modify each of
the energy management programs in order to optimize
comfort-energy
savings calculus
·
Test the control action of the major energy management programs
·
Use Honeywell documentation for planning the Energy-Comfort
strategy
Topics
·
Excel Plus Microcentral System Block Diagram
·
Energy Management Implementation Provision in CAE, the Database
Generation Program for the Excel Plus Systems
·
Theory of Operation of Each of the Energy Management Programs
·
Program Creation/Modification on-line
·
Program Testing/Optimization
·
Honeywell Documentation
·
Strategic use of Standard/Custom Reports
Top
Bulletin
CITS2005
Excel Plus Microcentral HVAC Programming (Deltanet PASCAL)
Class Type
Programming
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel responsible for Customization/Configuration of an
excel Plus
Microcentral DDC system
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course starts with a brief introduction to an Excel Plus Microcentral
System using a
simplified block diagram. The
function and intent of a DDC program in an Excel Plus
panel
is then elaborated on and the difference between an Energy Management Program
and a
DDC program is pointed out. The
course then goes into a study of
the elements of
the
Honeywell Programming Language Deltanet Pascal, the language DDC programs are
written in. Each set of elements of
the language is introduced with example program
segments which are actually tested on line.
The course also discuses the powerful
Honeywell DDC operators which convert the Deltanet Pascal language into a truly
structured programming language ideally suited for HVAC control.
Again the operators
are
actually used in program segments and tested on line.
The technical functions of
flowcharting, writing, compilation, downloading and testing of
programs are performed
repeatedly to enhance learning and internalizing of a certain
definitive
analytical thought-pattern.
Objectives
Upon completion of the course the student will be able to:
·
Identify the Point and Program files of an R7044 Controller
database
·
Understand the nature and significance of an HVAC Control Loop
·
Flow-chart an HVAC Control Loop using Deltanet Pascal
Standard Programming Symbology
·
Write program code to implement a flow-chart for an HVAC Control
Loop
·
Compile program code to executable/object code format using the
Pascal Compiler
·
Download object code for a DDC program into an R7044 memory
·
Test/checkout a downloaded program for correct on-line operation
·
Use all Honeywell Pascal HVAC operators to write error-free and
easily understood
programs
·
Eliminate the use of the ‘IF’ statement from any already
written program to enhance program readability
·
Excel Plus Microcentral System Block Diagram
·
Controller Point and Program files
·
DDC control loops
·
Flow-charting
·
Program Code writing using an editor program
·
Program Compilation
·
Program downloading/Program test/checkout on-line
Top
Bulletin
CITS2006
Excel Plus Microcentral PC Options
Class type
Programming
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance Personnel interested in Supervisory/Management optional
programs
implemented on the Microcentral Systems
Offered At
Customer site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course first identifies an Excel Plus Microcentral System using a
simple block diagram.
The course then discusses the function and intent of the PC applications
program. The
optional programs DR HALO, Maintenance Manager and the Energy Auditor Programs
are
then loaded onto the system PC hard disk. The
correct operation of these programs
is
verified.
The course then introduces the operating procedures of each program in
manageable
sets of functions for easy learning.
Written exercises are used extensively.
Objectives
Upon completion of the course the student will be able to:
·
Identify the purpose and intent of the PC Applications Program
·
Load the optional programs onto the system hard disk
·
Verify the correct operation of the loaded programs
·
Perform all operating procedures for all 3 of the optional
programs
Topics
·
Excel Plus Microcentral System Block Diagram
·
PC Applications Program
·
Optional Program Loading
·
Optional Program Operation Verification
·
Operating procedures for the DR HALO Program
·
Operating procedures for the Maintenance Manager Program
·
Operating Procedures for the Energy Auditor Program
CITS2007
Excel Plus Microcentral Advanced Topics Seminar
Class Type
Programming
System
Microcentral
Duration
4.5 Days
Class
Audience
Maintenance/Supervisory Personnel responsible for an Excel Plus System
with a PC and
Bus
Interface
Offered At
Customer Site or St Paul
# of
Students
Minimum 4 Maximum 8
Cost
$2110 per person at
site, $1827 per person St Paul
Brief
The course has no
fixed agenda. Students are expected
to have questions/problems or
procedural items that need clear answers or need to be investigated.
The course does
discuss Honeywell Technical Literature Organization.
Use of investigative ability and
technical language is encouraged.
Objectives
Upon completion of the course the student will be able to:
·
Exhibit independent investigative ability
·
Exhibit a knowledge of Honeywell Technical Literature
Organization
·
Articulate questions/comments for the Honeywell Rep using
technical terminology
Topics
·
Honeywell Technical Literature Organization
·
Student initiated questions/problems/projects
·
Instructor initiated questions/problems/projects
Top
Bulletin
CITS5000 Excel Plus
Microcentral Engineering/Service
Class
Type
Engineering/Service
System
Microcentral
Duration
4.5 Days
Class Audience Mechanical
HVAC systems maintenance persons that have responsibility to maintain or
reconfigure Micro/Macrocel systems integrated with their Excel Plus
systems using
Microcentral/Graphic Central front end. Also,
Electrical trades people or Electronic
Technicians responsible for Engineering/Reengineering or
Servicing an Excel Plus Microcentral
HVAC
System.
Offered
At
St Paul or Customer Site
#
of Students
Minimum 4, Maximum 8
Cost
$2110 per person site, $1827 per person St Paul
Brief
The course provides an overview of the entire Excel Plus system and its
extensions and
enhancements. The basic portion of
the course is a complete discussion of the entire Excel
Plus
Microcentral Engineering Sequence for any job of any description or complexity.
The course is very fast paced and learning takes place in large discrete
segments. The course
focuses on developing a very independent thought pattern characterized by an
aggressive
roblem-annihilating and not merely problem-solving approach.
The course first presents a very detailed block diagram of the Excel Plus
Microcentral System.
The course then presents a small
mechanical system to be controlled by the Excel Plus system.
To this end a point file is created
quickly to define all mechanical and electrical equipment. This
is followed by a Mechanical Systems Data Access scheme that is to be used by the
end-user.
After this the defined equipment is set
in required relationships with each other via the
programming language Deltanet Pascal. At
this point fire alarm equipment is added to the
already
created point file. Fire alarm
programs, if any, are also added at this point.
It is also shown that at this point Satellite processors such as Micro/Macrocel
point files can be
programmed. This completes the data
base creation sequence. Each record
creation is
illustrated on-line using a powerful Honeywell Engineering program.
Students follow with the
creation of similar records via elaborate written exercises.
The created database is then
checked
via the Validation routines in the engineering program. Error messages are
interpreted
and errors
corrected.
The validated database is then compiled and checked via the Generation Utility
of the
engineering
program. Generation error messages
are interpreted and errors corrected.
The compiled database is then used to print database logs and reports.
These reports are
deciphered and interpreted. Their
extensive nature and unusually comprehensive nature is
noted
strongly.
The generated database is also used to test operations in Debug mode.
This is off-line testing.
The generated database is then used to
create media databases for the downline processors
and the central processors.
The course then goes into media database installation and on-line test
and checkout.
Finally the entire sequence is done by the students again. This time the students work
independently on a given project. A
successfully working project is a very satisfying and
confidence-building experience.
Objectives
Upon
completion of the course the student will be able to:
·
Identify Excel Plus Microcentral System Hardware including the
Peer Bus and the C-NAP bus
·
Identify software/firmware in all components of the Excel Plus
Microcentral Central System
·
Perform all Database Modifications functions using the
Interactive Database Modification Utility of the Honeywell Engineering Program
·
Perform the Database Validation Function provided in the
Honeywell Engineering
Program
·
Interpret and rectify the validation error messages with
dispatch
·
Perform the Database Generation function provided in the
Honeywell Engineering
Program
·
Interpret and rectify the Database Generation error messages
with dispatch
·
Perform the Media generation functions provided in the Honeywell
Engineering Program
·
Generate required reports for analysis
·
Download Generated Databases to the required downline processors
·
Test and Checkout on-line the generated Databases after download
Topics
·
Excel Plus Microcentral System Block Diagram
·
Overview of Excel Plus System Software/Firmware
·
Nature and significance of R7044 Databases
·
Controller Database Record Access/Display/Modify Procedures
Using the Interactive Database Generator of the Engineering Program
·
Database Validation Procedure
·
Validation Error Messages
·
Database Generation/Compilation
·
Database Generation Error Messages
·
Downloading Processor databases
·
Database Test and Checkout
Top